Any grinding wheel has its certain wear and tear requirements, and if the wear reaches a certain level, it must be replaced with a new wire wheel. In order to save materials, it is not necessary to use excessive wear and tear, which is a very unsafe and illegal behavior. It is generally stipulated that when the grinding wheel is worn to a diameter that is 10mm larger than the diameter of the chuck, a new grinding wheel should be replaced. When the wire wheel is spinning, the same force will cause the weight of the grinding wheel to pull the wheel away from the center of rotation.
Do not use a wire brush to clean rims, because wire brushes are made of very stiff and hard wires.These wires will scratch the surface of the rims and wheels, and the wire brushes are very abrasive.
The wire wheel brush can be used in various aspects, mainly in the following aspects.
The main reason the wire cup brush is black is the oxidation of the steel surface and air.
Wire cup brush, especially wire rollers, are usually used in steel or aluminum surface treatment plants. A series of stainless steel wire cupo brushes are installed on the fully automatic high speed brush polishing machine (brush polishing machine).
Cup wire brush, as one of the industrial brush series, its application field is very wide. The most widely used industrial cup wire brush are mechanical processing, shipyards, shipyards, pipe welding plants, steel plate rust removal and so on.
